Samsung galaxy j1 released in 2015 as the first in line on the J series. It’s a low-end budget handset with a 4-core CPU, 1GB Ram, 8GB internal storage, 2MP, and 5MP front and rear cameras with android 4.4. OS runs with SM-J100M firmware. However, it’s capable for cover up most of the basics.

SM-J100M firmware

There are few firmware version models available for Samsung Galaxy J1. And this is the Samsung j100m flash file brazil

The Galaxy J1 is a first in the J series. And it’s released with android 4.4 which can be upgraded to android 6. Thus you can not expect much from the low Ram and Internal storage. So there can be inevitable software and hardware-related problems.

Why you need a Samsung J100M flash file

When the system file filled with bloatware J1 runs out the capacity very quickly. Therefore the battery will drain fast and misbehaving apps are not a joke. Besides updates will make the device more buggy. But we can resolve most of this issue by flashing J100 Flash File. Such as,

• Storage problems
• App misbehaving
• Lagging
• Battey draining fast issue
• Stuck in a boot loop issue
• The device automatically turns off
• Soft and hard brick

When you download firmware make sure to find it from an authorized website such as firmwarehome.com. Samsung J1 firmware download is completely free.

Samsung Galaxy J1 SM-J100M firmware download

★ Paraguay (UPO)

★ Trinidad and Tobago (TTT)

★ Panama (TPA)

★ Unknown (COD)

★ Brazil (TIM) (ZTM)

★ Brazil (VIVO) (ZVV)

j100m flash file 4 files for J1

The 4 file flashing technique is easy, fast, and convenient. If you wonder why there are more than half of system files that eating your mobile storage here’s why. Because bloatware packed in your device can not be removed easily. For that, we should unlock the bootloader and clear the bloatware. That’s why we need j100m flash file 4 files. It will wipe out the entire memory including all the junks and enhance the storage capacity.

How to flash SM-J100M firmware

1. First, install Samsung drivers on the PC
2. Download both J100 Flash File and Odin tool.
3. Then Extract both.
4. Run Odin exe as administrator.
5. Boot the Samsung Galaxy j1 into download mode.
6. Connect the device with the PC using a USB cable.
7. Odin will show an added message.
8. Then provide BL, AP, CP, and CSC files in each slot.
9. Tick the F.reset and auto reboot.
10. Finally, click start.
11. After few minutes Odin will show a pass message.
12. The j1 will be flashed by now. (How to flash info)

Wrap up

Galaxy j1 is the cheapest and smallest mobile phone in the J series. With low-range hardware and J100 Flash File, we can not expect much. But that doesn’t mean we have to throw it away because of software issues. Flashing  J100 Flash File will fix most of it.