Samsung SM-J260AZ Firmware Download 📥. Samsung’s mobile Galaxy J2 Pure has one of the model numbers is SM-J260AZ flash file download. Samsung Galaxy J2 Pure Android operating system download which you can get an Android Version 8 and 9.

Firmware upgrade or downgrade

However, if you need to upgrade the firmware version then take the latest android updated version. This is not OTA based update file, its original full stock firmware. It should be manually flash with the Odin flash tool.

You already have in the latest version Android 9. So is it not properly suites your phone? then you decide to downgrade the firmware. We already share Android 8.1 (Oreo) which phones first installed firmware.

Samsung SM-J260AZ Firmware Download

☆ Android 9.0 (Pie)

File Name: SM-J260AZ-J260AZTUS4BSJ1-J260AZAIO4BSJ1-AIO-9.0-5File.zip
File Size: 2.1 GB
SM-J260AZ Stock Firmware 📥: Start Download through this page

File Name: SM-J260AZ-J260AZTUU3BSH6-J260AZAIO3BSH6-AIO-9.0-5File.zip
File Size: 2.6 GB
SM-J260AZ Stock Firmware 📥: Start Download through this page

☆ Android 8.1.0 (Oreo)

File Name: SM-J260AZ-J260AZTUU1ASA1-J260AZAIO1ASA1-AIO-8.1.0-5File.zip
File Size: 2.0 GB
SM-J260AZ Stock Firmware 📥: Start Download through this page

File Name: SM-J260AZ-J260AZTUS3ASF1-J260AZAIO3ASF1-AIO-8.1.0-5File.zip
File Size: 2.6 GB
SM-J260AZ Stock Firmware 📥: Start Download through this page

File Name: SM-J260AZ-J260AZTUS2ASD2-J260AZAIO2ASD2-AIO-8.1.0-5File.zip
File Size: 2 GB
SM-J260AZ Stock Firmware 📥: Start Download through this page

How to Flash Galaxy J2 Pure SM-J260AZ

1. Download Stock Firmware and Odin3 flash tool
2. Extract download firmware package on your computer
3. The SAMSUNG Galaxy J2 Pure phone should be enabled download mode (show below how to do it)
4. Open Odin3 flash tool
5. Add firmware files to each slot BL, AP, CP, CSC in the Odin tool.  It will tack little time for adding the file.
6. Connect the Phone on your computer.
7. Odin must be able to recognize the phone with Top left ID: COM must be light Blue colored.
8. So, now everything fine, Start the process clicking the start button.
9. After a while, it should end with a green message.
10. The device should be rebooted automatically.

How to Boot Samsung J2 pure SM-J260AZ download mode (ODIN MODE)

• Firstly, the Phone Turns off.
• Volume Down + Home + Power button, These buttons press and Hold a few seconds.
• Then screen boot and display warning screen. So, now release buttons.
• After that push Volume Up key to continue to next step.
• Instantly Now, Galaxy J2 Prime will come to Download Mode.

Download Mode Exit Method:

If you stuck on the Download mode, such as the phone is soft-bricked with doing wrong things. you have two options try to recover your J2 Prime phone.

• Restart Phone: You can press the volume down and power button a few seconds. After phone reboot normally.
• Remove Battery: Another way to get exit this mode, you can just take off the battery, the phone will be off, put the battery back on.

⚠ In Addition:

If you got soft-bricked after wrong firmware flashing, then you need to be re-flash with the correct firmware to solve this case. Therefore, Every time we mention download the right firmware to prevent unnecessary troubles.

😊 😊 😊